SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - Sooner or later, forklift components would wear and need to be replaced. Purchasing brand new parts can become a costly undertaking so one more idea is to buy used lift truck parts. This could save much cash in the long run. It is a great idea to obtain used forklift parts that have been remanufactured. These parts would guarantee that you are getting parts that will work for a long time and be productive.
Worn or broken parts that are remanufactured are a very cost effective answer as opposed to rebuilding. With rebuilding parts, only the parts that are worn out or broken get replaced, which means that other wearable parts could break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable components replaced. This technique could offer the best assurance for used parts. All wearable components are replaced regardless of age or wear which is another reason why reproduced components overall work so much better. Whichever component within the part is new and this provides far longer life to the used part. Depending on the forklift parts which are being redone, the cleaning process and the complete remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Several parts of the engine such as spark plugs, pistons, rings, valves, valve springs, and filters could be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are oven cleaned, pressure washed, and disassembled. A thorough examination is done so as to check for any cracks. Seals, bearings and bushings are all replaced. Usually, the replacement components used on transmission components meet OEM specifications.
Some components like the alternator, the water pump, torque converters, the starter and steer axles can obtain longer serviceability after being remanufactured and having all wearable parts replaced. The electronic control in the electric lift truck is maintained by the control card. This particular card can even be remanufactured with replacing all aged and worn out parts. Unlike various forklift components the control card can only have the worn and aged components replaced.
Remanufactured components are comprehensively inspected upon reassembly to ensure they are in top condition previous to being sold. It is important when purchasing remanufactured components to make sure they have undergone the proper testing and inspection procedures. On certain larger components like for example transmissions, steer axles and engines, OEM specification replacement parts must be used.
The forklift dealer can guarantee that the parts they have reproduced meet the OEM specifications. This will also guarantee the parts meet industry standards. Lots of details go into remanufacturing used components. This attention to detail offers more serviceability out of remanufactured parts opposed to the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Atlanta, Georgia
forkliftpartsatlanta.com
Email Us
About Us